Overview
High-quality Acrylic Polishing Burs for finishing and polishing acrylic prostheses efficiently
Pricing
| MRP (list) | ₹59 |
|---|---|
| Discount | 76.4% |
| Offer price (rounded) | ₹14 |
| You save vs MRP | ₹45 |
Offer = MRP × (1 − discount%), rounded to whole rupees. Confirm on Teethment before purchase.
Features
Ideal for trimming or finishing of acrylic
Durable & premium quality burs
Different grits available as per need
Round Tip for gross Finishing & polishing of the acrylic material
Compatible with Lab Hanpiece/Straight handpiece
Details
ET Dental Acrylic Finishing & Polishing burs with Round Tip are premium quality burs used in finishing & polishing of acrylic prosthesis be it RPD (Removable partial denture) or CD (Complete Denture).
ROUND TIP: Are used in initial stage of finishing & polishing of acrylic , also where more area needs to be trimmed or for gross trimming
They are available in different grits & colors for trimming different phases of finishing & polishing:
Extra Coarse - Dark Grey - These burs are used for finishing of major rough surfaces or cuts present on the surface of prosthesis.
Coarse - Grey - These burs are used for finishing of major to minor rough surface of the prosthesis.
Medium Coarse - Brown - These burs are used for finishing of mild rough surfaces of the prosthesis.
Medium - Dark Green - These burs are used for finishing of rough corners/surfaces of the prosthesis.
Medium Fine - Pink - These burs are used for medium fine finishing & polishingof the surface of the prosthesis.
Fine - Green - These burs are used for fine finishing & polishing of the surface of the prosthesis.
Super Fine - Yellow - These burs are used for super fine finishing & polishing of the surface of the prosthesis.
Key specifications
Head Material : Stone polisher for Acrylic polishing
Handle material : Iron
Maximum allowable speed : 10000 rpm
Head Length : 24mm
Diameter : 10mm
Packaging
1 x ET Dental Acrylic Polisher Round Tip
Directions for use
Insert the instrument as deeply as possible into the Straight Handpiece.
Set the handpiece at the required working speed before applying the instrument to the treated area.
Apply a minimum operating force & do not exceed the recommended speed .
Finish borders with an acrylic bur.
Remove excess resin beyond the land area.
Be careful to preserve the border width and contour.
Smooth the denture bases to the proper contour with your acrylic burrs.
Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
Once the finishing has been completed, remove the instrument from the site and allow the bur to come to a standstill.
It is recommended to wear gloves and safety glasses.
Warranty
No warranty provided
Image
